SAS SFF-8482 to SATA 7Pin Red SAS Cable Connector Sata with High Transmission Speed

Description
SAS cable refers to SAS hard disk interface.SAS hard disk interface is the most critical device for disk media in the storage field. All data and information are to be stored on the disk media, and the reading speed of the data is determined by the connecting interface of the disk media. SAS cable is compatible with SATA hard disk drives.

SATA (Serial Advanced Technology Attachment) is a Computer bus that is responsible for data transfer between the motherboard and a large number of storage devices (such as hard disks and CD-ROM drives).SATA and SCSI are compatible with the two rows of cables, the SATA interface can be connected to the SAS interface, and supports hot-plugging and hot-swappable, fast transfer speeds, and support for SATA3.0 6Gbps high-speed transmission, high efficiency of the implementation.

Application data/communication

1. Independent Disk
2. Optical Drive
3. Workstation
4. Server
5. Storage shelf

 
Features and benefits
1. The transmission rate is 6Gbps.
2. Comply with SAS3.0 specification.

Mechanical behavior
1. Mating power and mating power
Conditions: EIA 364-13. Insert and extract at a speed of 25 mm/min.
Mating power: 50N max
Demoulding force: minimum 20N
2. Durability:
Condition: Eia364-09. 25 cycles for matched and unmatched connectors, 200 cycles per hour.
There is no physical damage and should meet the requirements of subsequent tests.

Electrical performance
1. Contact resistance
Situation: Environmental Impact Assessment 364-23. The main body matches the contacts assembled in the housing to a maximum of 20 MV. The maximum open circuit is 100Ma.
30 moms are the maximum, initially paired per contact.
2. Withstand medium voltage
Situation: Environmental Impact Assessment 364-20. Method B. Tests between adjacent mated and unpaired connector components. At sea level, the insulator should be able to withstand 500 volts for 1 minute.
There is no flashover, no sparks, no excess leaks, and no malfunctions.
3. Insulation resistance
Situation: Environmental Impact Assessment 364-21. Method C. Measure the insulation resistance between adjacent contacts of matched and unmatched connector assemblies.
The minimum tax is 1,000 moms.

Signal integrity
1. Matching connector impedance: 100 ohm ± 15%
2. Absolute cable impedance: 100 ohm ± 10%
3. Cable pair matching: ±5 ohm
4. Common mode impedance: 25～40 ohm
5. Insertion loss: -6Db maximum
6. Cross talk: -26 decibels
7. Propagation delay deviation: 10ps maximum

Product environmental regulations
Rohs2.0: Comply with Rohs2.0 standard